Best in class, long lasting and resistant to leakage, preserving water, time and money.
NDS PN16 Compression fittings are to be used with high-and-low density polyethylene tubing, diameters 16 to 110 mm.
Ideally suited for all your landscape irrigation applications like:
Maximum service pressure:
PN 16 bar from diameter 16 to diameter 63
PN 12.5 bar from diameter 75 to diameter 110
Not for use in hot water applications.
Made in factories certified under ISO 9001.
Tested and approved according to these standards: ISO 14236 (Czech Republic). ITC (Poland): BS Standard 5114, AS / NZ 4129, AS 4020.
This product range is not certified as compliant with international sanitary regulations for transport of drinking water and liquid foods.
| NDS PN16 Compression Fitting Models | |
|---|---|
|
|
Unscrew the nut one or two turns or to the last thread.
Cut the pipe and deburr if necessary. Mark the insertion depth.
Push the pipe to the mark or the stop-end.
Screw the nut on tight. The nut can be tightened manually or using a hook tool.
