PVC S&D Sanitary Tee, 4 in. Hub X Hub X Hub

SKU:

4P09

Vertical side view of the NDS 4 in. PVC Sewer and Drain 3-Way Sanitary Tee (NDS 4P09C*, NDS 4P09*, NDS 4P09)

Vertical front view of the NDS 4 in. PVC Sewer and Drain 3-Way Sanitary Tee (NDS 4P09C*, NDS 4P09*, NDS 4P09)

The NDS 4 in. PVC Sewer and Drain 3-Way Sanitary Tee (NDS 4P09C*, NDS 4P09*, NDS 4P09) with 4 in. S&D pipe attached to all three connection points

The NDS 4 in. PVC Sewer and Drain 3-Way Sanitary Tee (NDS 4P09C*, NDS 4P09*, NDS 4P09) in vertical position with 4 in. S&D pipe attached to the top and bottom connection points and a 4 in. HIPS S&D Fitting Round Grate attached to the middle hub (NDS 9P12)

The NDS 4 in. PVC Sewer and Drain 3-Way Sanitary Tee (NDS 4P09C*, NDS 4P09*, NDS 4P09) in vertical position with 4 in. S&D pipe attached to top and bottom connection points and a PVC S&D Female Fitting Cleanout Adapter attached to middle hub

Exploded view of the NDS 4 in. PVC Sewer and Drain 3-Way Sanitary Tee (NDS 4P09C*, NDS 4P09*, NDS 4P09) with 4 in. PVC S&D Female Fitting Cleanout Adapter and 4 in. MPT PVC S&D Cleanout Plug

Closeup of the middle hub end of the NDS 4 in. PVC Sewer and Drain 3-Way Sanitary Tee (NDS 4P09C*, NDS 4P09*, NDS 4P09)

The NDS 4 in. PVC Sewer and Drain 3-Way Sanitary Tee (NDS 4P09C*, NDS 4P09*, NDS 4P09) works with Sewer and Drain pipe per ASTM D 2729, 3034, 2751 and F 810

The NDS 4 in. PVC Sewer and Drain 3-Way Sanitary Tee (NDS 4P09C*, NDS 4P09*, NDS 4P09) is not compatible with DWV Schedule 40 pipe and fittings per ASTM D 2665

The 4 in. PVC Sanitary Tee adds a 90° sweep to a 4 in. sewer and drain (S&D) pipe run. The San Tee, or Sweep Tee, is installed for less turbulent flow and easier clean out of the pipeline. The San Tee connects three lengths of pipe, and also connects to select drainage products such as channel drain outlets, Flo-Well® Dry Well System, drainage grates, and pop-up emitters. This tee is used to add an intersection to the pipeline, connecting three pipes of the same type and diameter size. The drain fitting is made of polyvinyl chloride (PVC) for Hub X Hub X Hub solvent-weld connections. Meets applicable ASTM standards. For use in non-pressurized underground sewer and drainage applications; maximum working pressure of 5 psi.

Where to Buy Find a Contractor

Applications

Adds a sweeping “T” intersection to 4 in. Sewer & Drain (S&D) pipe in non-pressurized drainage and sewer piping systems for less turbulent flow and easier clean out of the pipeline
Adds a sweeping “T” intersection from select drain products that make 4 in. S&D connections such as channel drain outlets, Flo-Well® Dry Well System, drainage grates, and pop-up emitters to 4 in. S&D pipe
As part of a complete drainage system, the PVC tee adds a sweeping “T” intersection to the pipeline as it connects three pipes of the same type and diameter size together; it also adds an intersection connecting drainage product to drain pipe