By NORMA Group

PVC S&D 45° Elbow, 6 in. Hub X Hub

SKU:

6P03

Alternate view of the opening of the NDS 6 in. PVC Sewer and Drain 45° Elbow (NDS 6P03)

Alternate view with both 6 in. S&D pipes attached to either end of the NDS 6 in. PVC Sewer and Drain 45° Elbow (NDS 6P03)

Alternate view with 6 in. side of the 6 in. PVC Sewer and Drain 45° Elbow (NDS 6P03)

The NDS 6 in. PVC Sewer and Drain 45° Elbow (NDS 6P03) works with Sewer and Drain pipe per ASTM D 2729, 3034, 2751 and F 810

The NDS 6 in. PVC Sewer and Drain 45° Elbow (NDS 6P03) is not compatible with DWV Schedule 40 pipe and fittings per ASTM D 2665

The 6 in. PVC Elbow makes a 45° turn in 6 in. sewer and drain (S&D) pipe runs. The 45° Ell also connects to select drainage products compatible with 6 in. S&D connections such as drainage grates and pop-up emitters. This elbow is used to make a change in direction in the pipeline and connect two pipes of the same type and diameter size. The 45° Elbow for 6 in. S&D pipe is made of polyvinyl chloride (PVC) for Hub X Hub solvent-weld connections. Meets applicable ASTM standards. For use in non-pressurized underground sewer and drainage applications; maximum working pressure of 5 psi. This elbow is used to make a change in direction in the pipeline and connects two pipes of the same type and diameter size.

Where to Buy Find a Contractor

Applications

Adds a 45° turn from 6 in. Sewer & Drain (S&D) pipe to 6 in. S&D pipe in non-pressurized drainage and sewer piping systems
Adds a 45° turn from select drainage products such as drainage grates and pop-up emitters to 6 in. S&D pipe
As part of a complete drainage system, the PVC elbow adds a 45° turn to the pipeline as it connects two pipes of the same type and diameter size together; it can also add a 45° turn from drainage product to drain pipe