By NORMA Group

PVC S&D Increaser/Reducer Bushing, 4 in. Hub X 6 in. Spt

SKU:

6P07S

Closeup of the 4 inch sewer and drain spigot connection end of the PVC or HIPS increaser/reducer bushing (NDS 6P07S)

Closeup of the 6 inch sewer and drain hub connection end of the PVC or HIPS increaser/reducer bushing (NDS 6P07S)

The NDS 4 in. X 6 in. PVC increaser/reducer bushing works with Sewer and Drain pipe and fittings per ASTM D 2729, 3034, 2751 and F 810

The NDS PVC increaser/reducer bushing (NDS 6P07S) is not compatible with DWV Schedule 40 Pipe and fittings per ASTM D 2265

Connect 4 in. Sewer and Drain (S&D) pipe to 6 in. S&D fittings with the PVC Increaser/Reducer Bushing. The drain fitting also connects 6 in. S&D fittings to drainage products with 4 in. S&D connections such as select channel drain outlets, drainage grates, and pop-up emitters. This increaser/reducer bushing has a hub and spigot to connect two different pipe and fitting sizes. The Increaser/Reducer Bushing is made of polyvinyl chloride (PVC) and makes a Hub X Spt solvent-weld connection. Meets applicable ASTM standards. For use in non-pressurized underground sewer and drainage applications; maximum working pressure of 5 psi.

Where to Buy Find a Contractor

Applications

Connects 4 in. Sewer and Drain (S&D) pipe to 6 in. S&D fittings in non-pressurized drainage and sewer piping systems
Connects 6 in. S&D fittings to select drainage products with 4 in. S&D connections such as channel drain outlets, drainage grates, and pop-up emitters
As part of a complete drainage system, the PVC increaser/reducer bushing connects two different pipe sizes; also connects drainage product to pipe to convey excess water for proper release downstream