By NORMA Group

3/4 in. MPT 710 Series Compression Adapter, 10-Pack

SKU:

CMAP 710-PK10

NDS Compression Male Adapter 710 series with a 3/4 in. male pipe thread (NDS CMAP 710)

Side view of Compression Male Adapters 710 series with a 3/4 in. male pipe thread (NDS CMAP 710)

Closeup view of the compression male adapter end of the 3/4 in. Male Pipe Thread 710 Series Adapter (NDS CMAP 710)

Closeup view of the 3/4 in. male pipe thread end of the 3/4 in. Male Pipe Thread 710 Series Adapter (NDS CMAP 710)

The 3/4 in. MPT 710 Series Compression Adapter is used to connect to a 3/4 in. FPT connection point and transition to 710 Series supply tubing or dripline (0.704 in. to 0.710 in. OD). Tubing is inserted inside the blue compression ring, where an internal barb compresses the tube to hold it in place. This compression fitting is made of ABS plastic and treated with UV inhibitors to prevent fading and cracking.

Where to Buy Find a Contractor

Applications

Makes the transition from 3/4 in. pipe thread to 710 Series supply tubing or dripline (0.704 in. to 0.710 in. OD)
Use for subsurface or on grade installation; can be buried or left out on the surface in any weather; works in a variety of areas, from small to large, flat or sloped
As part of a complete drip irrigation system, the 3/4 in. MPT 710 Series Compression Adapter connects to a 3/4 in. FPT connection point and transitions to 710 Series tubing or dripline to transport water to the area to be irrigated

Features

Use to transition from 3/4 in. pipe thread connection point to supply tubing
Compression fitting creates a watertight connection; internal barb that compresses the inserted tubing to hold it in place; unlike a barbed fitting, the tubing is not stretched out to connect to the fitting
Designed to work with standard drip irrigation water pressures up to 50 PSI