By NORMA Group

Reducing Compression Tee, 700 Series to Dual 600 Series, 25-Pack

SKU:

RCT 997

Close up of 700 series opening of the Reducing Compression Tee (NDS RCT 997)

Use the Reducing Compression Tee to connect one section of 700 Series supply tubing or dripline (0.680 in. to 0.704 in. OD) to two sections of 600 Series supply tubing or dripline (0.610 in. to 0.640 in. OD). With the reducing tee, simply insert the 700 Series tubing inside the black compression ring and 600 Series tubing inside the green compression rings. An internal barb inside the ring compresses the tube to hold it in place. This compression fitting is made of ABS plastic and treated with UV inhibitors to prevent fading and cracking.

Where to Buy Find a Contractor

Applications

Connects three sections of supply tubing or dripline together (one section - 700 Series to two sections - 600 Series), making the transition from a larger tube size to a two smaller tube sizes
Use for subsurface or on grade installation; can be buried or left out on the surface in any weather; works in a variety of areas, from small to large, flat or sloped
As part of a complete drip irrigation system, the reducing compression tee connects one section of 700 Series tubing to two sections of 600 Series tubing to transport water to the areas to be irrigated

Features

Use to transition from one larger tube size to two smaller tube sizes
Compression fitting creates a watertight connection; internal barb that compresses the inserted tubing to hold it in place; unlike a barbed fitting, the tubing is not stretched out to connect to the fitting
Designed to work with standard drip irrigation water pressures up to 50 PSI