By NORMA Group

By NORMA Group

Hydro-Flo™ Jet Assembly with 2-Piece Jet, 180-Degree Fan Spray, 0.04 in. Nozzle, 24 in. Vinyl Tubing with 1/4 in. Barbed Inlet on 12 in. Stake, 100-Pack

SKU:

TA 24-1H4

For a quicker, more efficient drip emitter installation, use the Hydro-Flo™ Jet Assembly. The jet, 12 in. stake, and 24 in. of tubing with 1/4 in. barbed inlet come preassembled for convenience. The barbed inlet found at the end of tubing can be inserted into a punched hole in supply tubing, and the stake is inserted into the ground at your desired location. The fan spray emits water in a 180° half-circle pattern, and the 0.04 in. nozzle discharges water at up to 12 GPH with throw of up to a 9 ft. radius (at 30 PSI). The Hydro-Flo™ Jet Assembly is made of polyethylene, vinyl, and ABS plastic, treated with UV inhibitors to prevent fading and cracking

Where to Buy Find a Contractor
Applications
  • Releases water with a fan spray in a half-circle pattern (180°) for low-volume, overhead irrigation
  • Ideal for watering groundcover, flower beds, planting beds, vegetable gardens, and plants which prefer some humidity
  • As part of a complete drip irrigation system, the jet-spray delivers water gradually; with a non-pressure compensating emitter, expect varying water flow based on length of tubing or elevation, with higher flow closer to the water source
Features
  • Two-piece jet, 24 in. tubing with 1/4 in. barbed inlet, and stake come preassembled
  • Fan spray jet releases water in a half-circle pattern (180°)
  • Nozzle size of 0.04 discharges water up to 12 GPH with radius of up to 9 ft. (at 30 PSI)