By NORMA Group

By NORMA Group

Hydro-Flo™ Jet Assembly with 2-Piece Jet, 90-Degree Fan Spray, 0.06 in. Nozzle, 24 in. Vinyl Tubing with 1/4 in. Barbed Inlet on 12 in. Stake, 100-Pack

SKU:

TA 24-1Q6

The Hydro-Flo™ Jet Assembly means less work for you. Made for easier drip irrigation installation, the jet, 12 in. stake, and 24 in. of tubing with 1/4 in. barbed inlet come preassembled for your convenience. Simply connect the barbed inlet found at the end of tubing into a punched hole in supply tubing, and stake the system into the ground. The fan spray emits water in a 90° quarter-circle pattern, and the 0.06 in. nozzle discharges water at up to 28 GPH with a radius of up to 11 ft. (at 30 PSI). The Hydro-Flo™ Jet Assembly is made of polyethylene, vinyl, and ABS plastic, treated with UV inhibitors to prevent fading and cracking

Where to Buy Find a Contractor
Applications
  • Releases water with a fan spray in a quarter-circle pattern (90°) for low-volume, overhead irrigation
  • Ideal for watering groundcover, flower beds, planting beds, vegetable gardens, and plants which prefer some humidity
  • As part of a complete drip irrigation system, the jet-spray delivers water gradually; with a non-pressure compensating emitter, expect varying water flow based on length of tubing or elevation, with higher flow closer to the water source
Features
  • Two-piece jet, 24 in. tubing with 1/4 in. barbed inlet, and stake come preassembled
  • Fan spray jet releases water in a quarter-circle pattern (90°)
  • Nozzle size of 0.06 discharges water up to 28 GPH with radius of up to 11 ft. (at 30 PSI)