By NORMA Group

By NORMA Group

Hydro-Flo™ Jet Assembly with Adjustable Jet, 180-Degree Fan Spray, 0.03 in. Nozzle, 24 in. Vinyl Tubing, 1/4 in. Barbed Inlet on 12 in. Stake, 100-Pack

SKU:

TA 24-3H
The Hydro-Flo™ Jet Assembly with 1-Piece Jet, with a 180-Degree Fan Spray, 0.03 in. Nozzle, and 24 in. Vinyl Tubing with 1/4 in. Barbed Inlet on 12 in. Stake (NDS TA 24-2H3) comes pre-assembled
Top Down of the jet dial of the Hydro-Flo™ 1-Piece Jet Assembly with a 180-Degree Fan Spray and 0.03 in. Nozzle (NDS TA 24-2H3)
Close up of the top part of the assembly on the Hydro-Flo™ 1-Piece Jet Assembly with a 180-Degree Fan Spray and 0.03 in. Nozzle (NDS TA 24-2H3)
Close up of the 1/4 inch barbed inlet on the tubing end of the Hydro-Flo™ 1-Piece Jet Assembly with a 180-Degree Fan Spray and 0.03 in. Nozzle (NDS TA 24-2H3)
The Hydro-Flo™ Jet Assembly with 1-Piece Jet, with a 180-Degree Fan Spray, 0.03 in. Nozzle, and 24 in. Vinyl Tubing with 1/4 in. Barbed Inlet on 12 in. Stake (NDS TA 24-2H3) comes pre-assembled
Top Down of the jet dial of the Hydro-Flo™ 1-Piece Jet Assembly with a 180-Degree Fan Spray and 0.03 in. Nozzle (NDS TA 24-2H3)
Close up of the top part of the assembly on the Hydro-Flo™ 1-Piece Jet Assembly with a 180-Degree Fan Spray and 0.03 in. Nozzle (NDS TA 24-2H3)
Close up of the 1/4 inch barbed inlet on the tubing end of the Hydro-Flo™ 1-Piece Jet Assembly with a 180-Degree Fan Spray and 0.03 in. Nozzle (NDS TA 24-2H3)

Putting together a drip irrigation system piece by piece can be tedious and time consuming. Eliminate the hassle with the Hydro-Flo™ Jet Assembly. Jet, 12 in. stake, 24 in. of tubing, and 1/4 in. barbed inlet is preassembled and ready to install. Insert barbed inlet into supply tubing and insert stake into the ground. Control the volume of water released with a twist of the tab on the jet. Delivers water in a 180° half-circle pattern fan spray; 0.03 in. nozzle discharges water at up to 26 GPH with a radius of up to 9.0 ft. (at 30 PSI). The Hydro-Flo™ Jet Assembly is made of polyethylene, vinyl, and ABS plastic, treated with UV inhibitors to prevent fading and cracking

Where to Buy Find a Contractor
Applications
  • Releases water with a fan spray in a half-circle pattern (180°) for low-volume, overhead irrigation
  • Ideal for watering groundcover, flower beds, planting beds, vegetable gardens, and plants which prefer some humidity
  • As part of a complete drip irrigation system, the jet-spray delivers water gradually; with a non-pressure compensating emitter, expect varying water flow based on length of tubing or elevation, with higher flow closer to the water source
Features
  • Adjustable jet, 24 in. tubing with 1/4 in. barbed inlet, and stake come preassembled
  • Fan spray jet releases water in a half-circle pattern (180°)
  • Volume of water can be adjusted with a twist of the tab