By NORMA Group

By NORMA Group

Valve Assembly (No Jet), 24 in. Vinyl Tubing with 1/4 in. Barbed Inlet, on 12 in. Stake, 100-Pack

SKU:

TA 24-7
No Jet Valve Assembly includes 24 in. Vinyl Tubing with 1/4 in. Barbed Inlet on a 12 in. Stake (NDS TA 24-7)
Close up of the top part of the assembly of the No Jet Valve Assembly includes 24 in. Vinyl Tubing with 1/4 in. Barbed Inlet on a 12 in. Stake (NDS TA 24-7)
Close up of the 1/4 in. Barbed inlet at the end of the 24 in. vinyl tubing connected to a 12 in. Stake (NDS TA 24-7)
Close up of the backside of the Assembly showing two options to direct supply tubing and the valve for flow adjustment (NDS TA 24-7)
No Jet Valve Assembly includes 24 in. Vinyl Tubing with 1/4 in. Barbed Inlet on a 12 in. Stake (NDS TA 24-7)
Close up of the top part of the assembly of the No Jet Valve Assembly includes 24 in. Vinyl Tubing with 1/4 in. Barbed Inlet on a 12 in. Stake (NDS TA 24-7)
Close up of the 1/4 in. Barbed inlet at the end of the 24 in. vinyl tubing connected to a 12 in. Stake (NDS TA 24-7)
Close up of the backside of the Assembly showing two options to direct supply tubing and the valve for flow adjustment (NDS TA 24-7)

Control the volume of water released from the emitter with the Valve Assembly. Preassembled for a faster installation, it includes 24 in. of tubing with two 1/4 in. barbed connectors on a 12 in. stake (jet not included). The valve enables flow adjustment with a twist of the tab. Add a barbed microspray emitter to the 1/4 in. tubing, insert 1/4 in. barbed inlet found on the other end of tubing into a punched hole in supply tubing, and place the stake into the ground. The assembly is made of ABS plastic and vinyl treated with UV inhibitors to prevent fading and cracking

Where to Buy Find a Contractor
Applications
  • Attach jet emitter to tubing and connect tubing with barbed inlet into supply tubing for low-volume, overhead irrigation
  • Use with jet emitter to water groundcover, flower beds, planting beds, vegetable gardens, and plants which prefer some humidity
  • As part of a complete drip irrigation system, the assembly works with a low-flow emitter (sold separately) to deliver water gradually
Features
  • Mini valve, 24 in. tubing with 1/4 in. barbed inlet, and stake come preassembled
  • Barbed mini valve adjusts the flow of water
  • Designed to work with standard drip irrigation water pressures up to 35 PSI