By NORMA Group

PVC Compression Ring, 1/2 in. Slip X 250 Series Adapter, 100-Pack

SKU:

CA 250

Closer view of the 1/2 in. Slip side of the NDS 1/2 in. Slip PVC Compression Ring (NDS CA 250)

Closer view of the 250 series adapter side of the NDS 1/2 in. Slip PVC Compression Ring (NDS CA 250)

Solvent weld this PVC Compression Ring to one end of a 1/2 in. PVC slip fitting (sold separately) to form a leakproof adapter that transitions from 1/2 in. pipe to 250 Series supply tubing or dripline (0.250 in. OD). The orange compression ring has an internal barb that compresses into tubing to hold it in place. Compression ring is made of PVC and treated with UV inhibitors to prevent fading and cracking.

Where to Buy Find a Contractor

Applications

Compression ring can be solvent welded to 1/2 in. PVC slip fitting (not included) to create a leakproof compression adapter that makes the transition 1/2 in. pipe to 250 Series supply tubing or dripline (0.250 in. OD)
Use for subsurface or on grade installation; can be buried or left out on the surface in any weather; works in a variety of areas, from small to large, flat or sloped
As part of a complete drip irrigation system, the PVC Compression Ring is attached to a 1/2 in. PVC slip fitting to enable transition from 1/2 in. pipe to 250 Series tubing or dripline to transport water to the area to be irrigated

Features

Creates a compression adapter when attached to 1/2 in. PVC slip fitting to transition from pipe to supply tubing or dripline
Compression ring creates a watertight connection; internal barb that compresses the inserted tubing to hold it in place; unlike a barbed fitting, the tubing is not stretched out to connect to the fitting
Designed to work with standard drip irrigation water pressures up to 50 PSI