By NORMA Group

3/4 in. MHT 700 Series Compression Adapter, 50-Pack

SKU:

CMAH 700

Closeup view of the compression male adapter side of the NDS 3/4 in. Male Hose Thread 700 Series Adapter (NDS CMAH 700)

Closeup view of the 3/4 in. Male Hose Thread end of the NDS 3/4 in. Male Hose Thread 700 Series Adapter (NDS CMAH 700)

Use the 3/4 in. MHT 700 Series Compression Adapter to transition from 3/4 in. FHT connection point to 700 Series supply tubing or dripline (0.680 in. to 0.704 in. OD). Insert tubing into the black compression ring, where an internal barb compresses into the tube to hold it in place. This compression fitting is made of ABS plastic and treated with UV inhibitors to prevent fading and cracking.

Where to Buy Find a Contractor

Applications

Makes the transition from 3/4 in hose thread to 700 Series supply tubing or dripline (0.680 in. to 0.704 in. OD)
Use for subsurface or on grade installation; can be buried or left out on the surface in any weather; works in a variety of areas, from small to large, flat or sloped
As part of a complete drip irrigation system, the 3/4 in. MHT 700 Series Compression Adapter connects to a 3/4 in. FHT connection point and transitions to 700 Series tubing or dripline to transport water to the area to be irrigated

Features

Use to transition from 3/4 in. hose thread connection point to supply tubing or dripline
Compression fitting creates a watertight connection; internal barb that compresses the inserted tubing to hold it in place; unlike a barbed fitting, the tubing is not stretched out to connect to the fitting
Designed to work with standard drip irrigation water pressures up to 50 PSI